INFO

Medium Range Temperature Probe (MRT)

Temperature sensor which transmitts temperature data via radio to the collection unit where
it is displayed at the computer software

External Door Senser Attachment Option
 Accuracy 0.5°C
 Up to three channels available
 One channel for internal thermistor sensor (40C to +60C)
 One channel for optional external temperature sensors (–50C to +150C)
 One channel for optional external door sensor (open / closed)
 Recording interval 4 to 60 seconds or 1 to 240 minutes
 Delayed recording start time: 1 minute to 1 month
 Can be configured to record maximum temperature during each time period
 Can be configured to record minimum temperature during each time period
 Can be configured to record temperature at exact time of period (default)

External Temperature Probe:

The MRT unit is capable of having a external temperature sensor attached the record and trasmit data via radio from another location, the benefit of these external sensors are that they exceed the temperature perameter of the internal sensor in the MRT allowing it record much more extreme temperatures

low range temperature probe : -40°C/+60°C
Medium range temperature probe: -20°C/+130°C
High range temperature probe: +10°C/+150°C

RL-RU Unit

The RL-RU Unit also known as a RL Repeater is used to recieve radio signals from MRT units and relay the signals to the collection unit, these are used when the distance between the sensors and the collection unit is too great, they operate on 433 MHz and have an internal battery back-up in case of a power cut.

By using these RL-RU Units you can drematically increase the size and range of your Icespy RL system because the amount of these units that can be installed is limitless

Stainless steel, heavy-duty transmitter with built-in 100mm penetration probe, at 90° to transmitter body, ideal for wet cookers, blast freezers and moving processes.

Operating Temperature 0°C to +85°C
Environmental protection IP68
Case Stainless Steel
Radio Frequency 433 MHz
Radio Range 100m in free air space, unless below -10°C/above +50°C
Transmission Rate Approximately every 50 seconds at 30m/sec radio packet
Weight 250g
Battery Life 10 years under normal conditions

  The S5-T-BLOCK is a core temperature simulant probe that meets BS4376 and is used to monitor the
  storage conditions of blood plasma and fluid drug samples in hospital refrigerators.
 
  Can be used with RL MRT probes (call for more info)

  Temperature Specifications

  Temperature range: -30 °C to +60 °C

  Response times (typical, still air on removal from
  fridge / freezer):

  100ml Block: 30-60 mins (to 90% of change)
  200ml Block: 60-120 mins (to 90% of change)

  Accuracy (standard factory calibration): +/-0.5°C
  (or better)

  Optional calibrations available up to +/-0.2°C

  Response time (typical, still air on removal from
  refrigerator): 25-50 minutes (to 90% of change)
  depending on orientation.